MEC10 3 in 1 Soil (MTI.AWS.INF.MEC10) measures soil moisture content, EC and temperature. It sealed with resin packaged plastic body with sensing rods which can be insert directly into the soil with long time stability. The soil moisture output signal can be RS485, Analog Voltage or Analog Current. It can also be calibrated for specific soils. The sensor is applicable for science research, irrigation, greenhouse, smart agriculture etc.
■ Integrated with Soil Moisture, EC, Temperature measurement
■ Output Interface with RS485, Voltage, Current
■ Low salinity sensitivity
■ Minimal soil disturbance
■ Water proof to IP68 ratings and can be directly buried into soil
■ High accuracy with excellent stability
■ Reverse power protection and Built-in TVS/ESD protection
MEC 10 3 in 1 Soil (Moisture, EC, and Temperature)
• Output Interface:
1) Analog Voltage 0-2V (Output resistance ~0ohm)
2) Analog Current 4-20mA (Load Resistor<500ohm)
3) RS485, Modbus-RTU
• Power Supply: 3.6-30V/DC, 12-30V/DC, 3.6-30V/DC
• Power Consumptio: 6mA@24V DC, 50mA@24V DC(with 2*20mA output signal), 6mA@24V DC
• Soil Moisture Measurement:
1) Range:0-50%,0-100%
2) Resolution:0-50%:0.03%,50-100%:1%
3) Accuracy:0-50%:3%,50-100%:5%
• EC Measurement
1) Range: 0-5000us/cm, 10000us/cm, 20000us/cm
2) Resolution: 0-10000us/cm, 10us/cm; 100000-20000us/cm, 50us/cm
3) Accuracy: 0-10000us/cm, ±3%; 10000-20000us/cm, ±5%
4) EC temperature compensation: 0-50℃
• Temperature Measurement Range: -40~80℃, Resolution:0.1℃, Accuracy:±0.5℃
• Measurement Technique: mMoisture by FDR and EC by AC excitation
• IP Ratings: IP68
• Operating Temperature: -40~85℃
• Sensor Rod: Stainless steel
• Sensor Sealed: Epoxy resin
• Installation: Surface or buried installation
• Cable Length2; meters or Customize
• Dimension: 44*15*146mm