Load Cell Model ELC-210S (MTI,EWS.ER.M-ELC-210S). The internal construction of the load cell is columnar. The element of the load cell is made of martensitic stainless steel. The element is hardened to give better linearity and hysteresis. The strain gages used is of foil type and are bonded to the elements using special epoxy cements which are very reliable.
Load Cell Model ELC-210S
• Sensor Type: Resistive strain gage
• Parameter: Load/force
• Range: 1000, 1500, 2000, 3000, 3500 kN
• Key Testing / Calibration: Accuracy test, Overload test
• Key Feature/Advantage: Hermetically sealed with electron beam welding, great resistance to extraneous forces, long fatigue life, protected against dust, moisture and adverse environmental conditions
• Protection (Waterproofing): IP-68, water resistant up to 10 mwc
• Dimension (mm): Depends on range
• Over range capacity: 150 %
• Non linearity: ± 1 % fs
• Output: 1.5 mV/V ± 10 %
• Excitation: 10 V DC (maximum 20 VDC)
• Terminal resistance:
- Input: 770 Ohm ± 5 %
- Output : 700 Ohm ± 1 %
- Temperature:
-20 to 80°C limit
- Cable connection: Four core shielded 2 m long