PSS-800 SS (Sludge Concentration )Sensor is based on the method of combination of infrared absorption scattered light.e infrared light emitted by the light source is scattered by the suspended particles in the sample, and finally converted into an electrical signal by a photodetector, and the sludge concentration of the sample is obtained after analog and digital signal processing. Features
TSS Sensor (PSS-800)
• Model No.: PSS-800 Probest high quality low price SS TSS MLSS turbidity meter transmitter
• Measurement range: 0.01-20000 mg/L,0.01-45000 mg/L,0.01-120000 mg/L
• Measurement accuracy: Less than ±5% (Depending on the homogeneity of sludge)
• Pressure range: ≤0.4Mpa
• Flow rate: ≤2.5m/s,8.2ft/s
• Calibration: Sample Calibration,Slope Calibration
• Main material: Body:SUS316L(fresh water)Cover:PVC;Cable:PVC
• Power supply: AC:85-500VAC (50/60HZ) DC:9~36VDC
• Output: 3-way 4-20mA
• Relay: Setting three-way relays,programmed response parameter and response value.
• Communication protocol: MODBUS RS485
• Measuring temperature: 0-40℃
• Dimensions: Sensor: Dia 60mm*Length 256mm Transmitter: 145*125*162mm(L*W*H)
• Weight: Sensor:1.65KG;Transmitter:1.35KG
• Protective rate: Sensor:IP68/NEMA6P;Transmitter:IP65/ NEMA4X
• Cable length: Standard:10m,the maximum may be extended to 100m
• Optional: With Rubber Scraper / With baud rate or without
• Suggested Backup spare parts: PGP-SS-01 Rubber scraper